Trinity Decals, Ceramic decals, Glass decals, custom water slide decals

Home

About Us

Decals FAQ's

Instructions

Policies

View Cart

Search

Contact Us

Login

Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout


Shop Our New Store
Please excuse any image display issues during the website improvements.  Phone orders are welcome!

 Trinity Decals
 208 N Main Ave.
 Lake Placid,  FL  33852
 
 (863) 699-4082
 (863) 699-4083 (Fax)

 

Ceramic decals, Glass decals, custom water slide decals   

 
Products

Home » On-line Store » DIGITAL CUSTOM WATER SLIDE DECALS

 Checkout
 

Your files and images


We prefer jpegs or pdf files with Image resolution should be a minimum of 300dpi – 600dpi  for the best quality reproduction.


 
• We use SRA3 ( 32 x 45cm )  12.5 x 17.70 inchesd sheet. The maximum print area is (30 × 43cm) 11.80 x 16.90 inches set up your layout at this size and fill with as many transfers as you wish.

Please email to: decals@trinitydecals.com

Print Charges:

1 sheet $30.00 per sheet
2 to 4 Sheets $28.00 per sheet
5 to 9 Sheets  $27.00 per sheet
10 Sheets $25.00 per sheet

PLUS SHIPPING.

There’s NO minimum charge, so you can order as few or as many sheets as required, either as a small order or to test for a larger run.

 a. It is our policy to recommend that customers have a proof prior to production to check design layout, artwork, colors etc. If customers choose not to purchase a proof then we will ask for confirmation in writing. Once approved, the proof remains the standard for manufacturing within our general terms of sale.
 
b. A Decal/Transfer proof is $50.00 plus delivery.


 ***ALL PRICING IS SUBJECT TO CHANGE WITHOUT NOTICE.*** 
Design support:

If you need assistance preparing your artwork for print, we offer a full design and fitting service at our studio. You’ll be given an estimate on costs before you place your order, so you know exactly what to expect.

Firing Digital Decals:

The decals should be dipped into room temperature water and removed once loose from paper (do not leave the decals floating in water).

Use a medium squeegee  to apply the decal to the dry ceramic piece at room temperature working from the middle to ensure that all water has been removed.

It is best to allow the decorated piece to dry for 12 hours or ideally overnight in a warm environment.

Digital decals have the same properties as conventional screen printed decals however if you are firing digital decals for the first time then use these instructions as a guide.

Magenta Colour Set Transfers (820 – 840°C) (1508 - 1544 F ) Cone 014

  • We would usually fire at 250°C - 482 F per hour up to 840°C - 1544 F with a 15 minute soak.
  • Firing cycles should all be well ventilated. (Kiln holds at 820°C - 1508 F for 15 mins)
  • The kiln then cools naturally.

Red Colour Set Transfers (780 – 800°C) ( 1436-F to 1472 F ) Cone 015 

  • For red set colours also 250°C - 482 F per hour up to 800°C - 1472 F with 25 minute soak.
  • Firing cycles should all be well ventilated.
  • The kiln then cools naturally.
  • Ventilation during firing especially critical until 550 Celsius  ( 1022 Fahrenheit ) 

Price:
 

Enamel waterslide transfers are ideal for decorating on to enameled steel.  When fired, the colours sink into the enamel surface creating stunning, colourful designs that have the longevity associated with ceramic colours.

Compatability: Most Enamel coatings.

Enamel waterslide transfers are ideal for decorating on to enameled steel.  When fired, the colours sink into the enamel surface creating stunning, colourful designs that have the longevity associated with ceramic colours.

Enamel decals = 100 Celsius ( 212 Fahrenheit )  per hour to 225 Celsius  ( 437 Fahrenheit )  + 20 minute hold then 350 Celsius  ( 662 Fahrenheit )  per hour to 540 Celsius  ( 1004 Fahrenheit )  + 10 minute hold then 550 to 740 Celsius ( 1022 – 1364 Fahrenheit ) with 15 minute hold.

All above need ventilation during firing especially critically until 550 Celsius  ( 1022 Fahrenheit )

With or without Flux. 

 Print Charges:

1 sheet $32.00 per sheet
2 to 4 Sheets $30.00 per sheet
5 to 9 Sheets  $29.00 per sheet
10 Sheets $26.00 per sheet

Price:
 

High temp In Glaze  = 250-350 Celsius  ( 482 – 662  Fahrenheit )  per hour to 1080 Celsius  ( 1976 Fahrenheit ) for bone china or 1280 Celsius  ( 2336 Fahrenheit ) for porcelain. Hold for 20 minutes.

  • Ventilation during firing especially critical until 550 Celsius  ( 1022 Fahrenheit ) 

We prefer jpegs or pdf files with Image resolution should be a minimum of 300dpi – 600dpi  for the best quality reproduction.
 
Standard sheet size is SRA3 and is an extra 15% larger print area than regular A3 size. We use SRA3 ( 32 x 45cm )  12.5 x 17.70 inchesd sheet. The maximum print area is (30 × 43cm) 11.80 x 16.90 inches set up your layout at this size and fill with as many transfers as you wish.

Please email to: decals@trinitydecals.com

Print Charges:

1 sheet $30.00 per sheet

2 to 4 Sheets $29.00 per sheet

5 to 9 Sheets  $28.00 per sheet

10 Sheets $26.00 per sheet

PLUS SHIPPING.

There’s NO minimum charge, so you can order as few or as many sheets as required, either as a small order or to test for a larger run.

 a. It is our policy to recommend that customers have a proof prior to production to check design layout, artwork, colors etc. If customers choose not to purchase a proof then we will ask for confirmation in writing. Once approved, the proof remains the standard for manufacturing within our general terms of sale.
 
b. A Decal/Transfer proof is $50.00 plus delivery.


 ***ALL PRICING IS SUBJECT TO CHANGE WITHOUT NOTICE.***  
Design support:

 

If you need assistance preparing your artwork for print, we offer a full design and fitting service at our studio. You’ll be given an estimate on costs before you place your order, so you know exactly what to expect.

Price:



 

White Digital Printing

Your design printed as a high resolution digital ceramic decal

NEW white ceramic color for firing at 250-350 Celsius  ( 1148 to 1472 Fahrenheit)  per hour  to  780 – 840 Celsius ( Fahrenheit.  This color will work on colored ceramics, glass and enamel surfaces (subject to testing).

For Glass firing  620 to 680 Celsius ( 1148 to 1256 Fahrenheit )

Ventilation during firing especially critical until 550 Celsius  ( 1022 Fahrenheit )

Your files and images

We accept most variety of file formats; we prefer jpegs, or pdf files (When saving pdf files please embed the color profile)

• Image resolution should be a minimum of 300dpi for the best quality reproduction. 

• The maximum print area is 19cm x 27cm ( 7 31/64 x 10 5/8 inches )

• Please send images in black only or greyscale.

 

• Minimum order is $75.00 for 4 decal sheets if the same design

If you need assistance preparing your artwork for print, we offer a full design and fitting service at our studio. You’ll be given an estimate on costs before you place your order, so you know exactly what to expect.

Plus shipping.

Price:
  

 
 

home | about us | policies | search | General Decal Instructions |Detailed Decal Instructions |checkout | contact us |

 

 

Copyright Policy  Privacy Policy

Copyright 2018 Trinity Decals, All rights reserved.
Design and Hosting by
SanbornWebDesigns